How it works
As with all EDS instruments the Vega Expert uses a probe to measures the electrical
resistance of acupuncture points. A mechanical
meter scaled between 0
and 100 located on the front panel is used to display the probe readings. To perform a test the client is
stimulated with energetic signature patterns stored in the Expert while a
reading is being taken with the probe. If this stimulus causes a deviation in the readings this is used to indicate an issue between the substance being
tested and the subject.
Simple pictorial guide to CEDS screening.
Construction
In common with all Vega equipment the main box is constructed from a tough white plastic
which gives an appropriate clinical and professional look. The front panel contains a clearly readable test metre, probe pressure
indicator lights, a sensitivity dial, treatment level dial, two
memory buttons, power switch and a honeycomb test tray. The built-in LCD
computer screen and three menu buttons located underneath the test metre give
access to the electronically stored test ampoules which are supplied as a
plug-in card. This card plugs into a slot in the side of the instrument.
The top of the unit contains a thin slot which forms the magnetic card
writer (SI). The side of
the unit has a volume control to vary the sound level during testing.
The stainless steel hand electrode and a sprung loaded point reading probe are
attached at the rear through flexible wires. The back of the device also houses connections for a printer and computer with additional connections for a footplate, foot switch and head electrodes.
The Vega Expert is powered by an internal, sealed, lead acid battery and incorporates a battery charger.
The batteries should give several days use between charges, though this
will be reduced if a
lot of stimulation treatments are performed.
The probe houses a sprung loaded tip which has a spherical end. Lights on
the front of the instrument indicate the pressure being applied by the
probe as an aid to the probing process.
Software
The electronically stored test ampoules are supplied as a range of plug-in
cards. In total 1400 items are available and accessed through the
built-in LCD display and three menu buttons. This process is logical and straightforward.
Two memory buttons allow the
temporary storage of signature information for test ampoules placed in the
honeycomb plate.
Optionally software is available that allows a computer to be connected to the Vega expert through a serial lead
(not USB) and will record the
client details and test results.
In use
The Vega Expert is switched on via a switch on the front panel and is immediately available for testing. As with all
CEDS equipment the basic screening involves the client holding a hand
electrode in one hand and
the probe being applied by the operator to a point on the other hand. In practice the probe
is comfortable to hold and can be used with a light touch. A double
pumping action of the probe is used to take readings, as the readings are
taken the operator notes the meter readings for each pump and any variation between these. To aid the probing process
a series of lights along the top of the meter indicate the pressure being
applied by the probe. The same number of lights should be activated for
each pumping action (ie same pressure). An audio aid is also provided, as the metre reading increases
an audio pitch also increases.
The combined process of accurately applying the probe to a
point in a pumping action, maintaining consistent pressure and
visually noting two readings takes some practice, however most people
should be able to fairly quickly gain this skill.
The built in computer screen and associated menu buttons allow quick
and easy access to the electronically
stored test ampoules. Once a test ampoule is selected the probe is applied two times in quick succession and the reading
for each noted on the meter. If there is a variation in the two values this is interpreted as indicating a
causative factor, deficiency, imbalance etc as appropriate to the test
being performed. A nice touch is the use of a foot pedal to manually
advance through menu and item choices reducing the need to disturb the
screening process by having to press buttons. At the end of each test basic
printouts of the results can be generated.
The determination of remedies has to be performed using manual test ampoules as no electronically stored remedies are available
through the plug-in cards. This involves placing the remedy ampoule on the
honeycomb plate and taking readings to monitor the subject of response to
these. Where favourable responses are found this is used to indicate the
suitability of the remedy.
Once the screening has been completed the integrated magnetic strip writer can be used to transmit the frequency information of found remedies to a credit card size magnetic
card (SI card). The card is placed in the writer at the top of the instrument and the transmission button is pressed. The card can then be worn by the client as a treatment.
The expert has the additional feature of being able to invert these signals
to act in a way as to desensitise the client from things they have
sensitivities to.
 To use
the resonant screening facility the client places his feet on a foot palte, holds two hand electrodes and has an electrode band place round his head. The automated test procedure is selected by a button on
the front of the machine and after two minutes a graphical display appears
on the screen. The energy scores clearly indicate areas of hypo activity
(low),
hyper activity (high) and rigidness (no variation between the two columns). This gives useful additional information
about the client and helps focus the assessment and treatment.
 The dental
screening procedure simply involves attaching a dental probe and placing
it on to the
amalgam fillings. The Vega Expert automatically takes the reading and
displays the results. The amount of current voltage and power indicate the
state of the filling.
This instrument is quick and easy to use in practice and allows rapid
analysis of the clients energetic health.
Results
If a printer is attached (only certain printers will work with the
expert) the results of each screening can be printed out
as basic reports.
How differs from other devices
The Vega Expert is the only CEDS device to offer resonant energy screening, 10 and 13 hertz treatments and direct dental voltage
measurements. It is also the only device that does not require the use of an
additional computer.
Training
The distributors Noma provide a one and a half day's on-site training with this machine. This
covers the basic essentials of using the Vega Expert.
Would suit
Most therapists looking for a universal Computerised Electro
Dermal Screening instroment. Anatomy and physiology plus a recognised therapy are required.
Complimentary products
A range of attachments are available for the Vega Expert.
The Vega quick test is a device that allows up to 96 test ampoules to be
tested at one go. Individual rows of ampoules can also be tested and this facilitates
the rapid evaluation of appropriate remedies.
Microsoft Windows based software is available giving the facility
to record client results and client information.
How many in the UK
About 50.
History
The Vega Expert was launched in 1997 and represents a significant step for
Vega, this being their first instruments to incorporate digitally stored
ampoules. Its predecessor was the manual Vega II which had a treatment
facility and EDS capabilities but little ouse.
Costs - These are guideline costs only, please check with supplier for
full details.
Vega Expert (with no test cards )- £4,300 + vat
Vega Expert package including extended test card (750 ampoules), foot pedal and printer -
£5,300 + vat
Additional test card VDS (750 ampoules) - £1200 + vat
PC Software (stores results, also works with Vega Check) - £1200
 Copyright
emreview.org.uk 2004. All rights reserved. Disclaimer
Home > Evaluate
> CEDS > Vega
Expert  Print
Page
|
