Summary
The Q2 Water Energy System is a sophisticated
footbath spa which helps rebalance the body's bio-energy fields. It
consists of a control unit and energising orb which is placed in a
foot bath (note the footbath shown in the picture above is not
included). The system is very simple to use and is fully automated
with a half-hour treatment cycle.
| Treatment | |
| Conditions | Detoxification and neutralisation of toxins, revitalised blood, increased vitality, pain and stress relief, faster recovery from illness and injury, reduced inflammation, improved sleep, reduced fluid retention, improved endocrine and metabolic function. |
| Will treat |
| Features | |
| Safe compact and portable design. | |
| Very strait forward to learn to use. No special certificates required | |
| Minimal training required to reach competent level of use |
How it works
The Q2 has a control unit which provides a low level electrical supply (29V
DC) to the unique water electrode array. The design and structure of the array
is crucial to the efficiency of the unit and has undergone considerable research
and development. The array has an arrangement of copper and stainless steel
plates spaced evenly apart. The electronic control unit works with the array to
create specific electromagnetic signature frequencies and harmonics which are
transmitted to the body through the water. Also the natural electrolysis
process between the plates generates charged irons in the water.
The absorption of the charges and frequencies has been shown to increase the potential voltage in a body's membranes, enhancing the immune system and helps maintain cellular function. All living things are surrounded by what is known as a bio-electric field or L field (Living field). This field can be detected by scientific instruments and appears to change as living things undergo different experiences. Part of the way this device works is to interact with the person's L field.
Hardware
The control unit consists of a compact, grey plastic box which is fully sealed
and water tight (up to 16psi). The front contains indicator lights and
operational switches. There is an internal cooling fan which generates a low
level of noise while the unit is switched on. The Q2 unit is constructed to a
reasonable standard and appears to be fairly robust.
The orb consists of a tough plastic sphere which can be separated into two and
give access to the internal plate rings for cleaning and replacing. There is a
knack to opening the orb
In use
Operating this device is very simple. First the foot bath is filled with warm
water and the Q2 array is placed in it. The client sits on a chair and puts
their feet in the bath. The control unit is adjusted to the appropriate power
rating and set and left to run for 30 minutes. After this time the treatment is
complete, that's all there is to it. The client may feel a slight tingling in
the feet at the time but apart from this most will only experience a sense
of relaxation.
During the treatment the water may become discoloured. Most of this is due to the electrolyse process in the array precipitating impurities out of the water. Some of the discolouring may be due to toxin release form the client.
Effectiveness
How differs from other products
Training
The machine is supplied with a days training.
Would suit
As a therapeutic spa the Q2 is an extremely useful addition to both orthodox and
complementary medical therapies.
How many in the UK
History
This device was developed by Terry Skrinjar in Australia. The original device
was called a Bio-Electric Field Enhancement unit (BEFE) from which the Q2 has
been developed. The array has undergone several incarnations resulting in the
current Orb.
Costs
Model 3100 Practitioner - £1450 + vat.
Model 4100 Professional - £1950 + vat
Copyright
emreview.org.uk 2004. All rights reserved. Disclaimer
Home > Treatment
> Aqua > Q2 Print
Page