Summary
The Mora Super is a sophisticated BioResonance treatment device incorporating over 100 preset therapeutic programmes.
This device uses electrodes to detect electromagnetic information in the body,
modify this information and fed it back as a treatment signal through probes or electrodes.
This process enhances regulation and
detoxification, counteracting energy imbalances as well as stimulates the immune system.
The Mora Super has a built-in Electrode Dermal Screening (EDS) device which is used to assess the clients energy balance, nutritional status, toxins etc and can also be used to modify the preset treatment programmes. Input cups and a remedy honeycomb allow the incorporation of client's tissues and remedies (flower, homoeopathic, herbal etc) into the treatment signal.
This is a comprehensive self contained bioresonance/ EDS device that can be
used both in a straightforward manner for standard therapeutic treatments or
for very advanced applications allowing extensive modifications to
treatment programmes and even the development of new treatment programmes.
| Treatment | |
| Detects and treats | Infectious diseases, allergies, auto immune diseases, disorders of rheumatic genesis, pain, metabolic disorders, degenerative diseases, neurological disorders. |
| Regulation | Boosts immune system, treats geopathic stress, reduces scar interference, detoxifies, reduces pain and inflammation, regulates hormonal system. |
| Preset programmes | Over 100 to choose from including: lymph toxicity, bio-rhythms, hot pain, general pain, cold pain, lung conditions, amalgam detox, shoulder tension, hormones, gastro intestinal, nervous system, varicose veins, acne, warts, herpes, rheumatics etc |
| Features | |
| Bioresonance frequencies | 100 built-in preset treatment programs which can be selectively modified to meet individual client requirements. Treatment frequencies between 10 hertz and 100,000 hertz with band-pass, high pass and low pass filters. |
| Input Cups | Clients body fluids or other samples can be placed in the input cups and their signature used as part of the treatment programme. One cup is for chronically affected tissue and the other for acutely affected tissue. |
| Magnetic Output Cup | The combined output frequencies can be magnetically imprinted into a carrier (cream, oil, homeopathic) placed in the output cup. |
| Active output electrodes | The magnetic active electrode gives extra penetration for pain, lymph, scar, tonsil or muscle problems etc. |
| EDS | Built in electro dermal screening capabilities. Used to assess the energetic state of meridians, nutritional levels, toxins, food sensitivities etc. Also used to select Mora treatment programmes and modify them if required. |
| Input electrodes | Head, hand, feet, cylinder and flat electrodes are available for different applications. |
| Honeycomb tray | Remedies/ stressors placed in the remedy tray are combined with the output frequencies as part of a treatment or used for EDS testing. |
| Spin Test | A drop of blood place in the spin tester can be used to detect geopathic stress. |
| Teeth measurements | Facility to measure amalgam filings voltage, current and energy. |
| Quadrant testing | Facility to perform basic 7 body quadrant evaluation. |
| Potentising | Built-in facilities to homoeopathic potentise input substances between 3X and 400X. |
| Windows Software | Up to 700 separate items are available from the optional electronic Homeopathy software database. Any of these items can be tested against the client to check its suitability as a remedy or as a causative factor. |
| Electronic Homeopathy | 16 test categories including: 366 allergens, 60 Batch flowers, 92 chemicals, 320 dental, 346 nosodes, 121 vitamin and minerals. |
| WinBase - PC software) | Stores client records and test results on a PC. Displays test readings on computer screen and prints reports. |
How it works
The principle behind the Mora bioresonance treatment process is one of detecting and
therapeutically working with micro-electromagnetic information within the human body. The aim of Mora therapy is to
regulate the body's inherent biophysical control mechanisms and to stimulate
and reinforce the body's own immune system. Electrodes attached to the body
surface pickup micro-electromagnetic resonance information which is fed
into a sensitive electronic processing system containing frequency filters. The
detected frequency information consists of
healthy (harmonious) frequencies and pathogenic (dis-harmonious) frequencies.
The Mora filters can separate these two frequencies and apply amplification and
inversion (mirror image) to them.
The modified frequencies are then fed back to the client through electrodes.
The mirror image frequencies are designed
to counteract (cancel out) dis-harmonious frequencies and diminish micro-electromagnetic forces between burdening molecules
limiting their ability to self regulate. The healthy frequencies are designed to
enhance the bodies good energies.
Simple pictorial guide to Bioresonance screening.
The Mora Super also incorporates an ElectroDermal Screening (EDS) device. This measures electrical conductance of acupuncture points and is used to indicate the energetic state of meridians and to give biofeedback to help determine appropriate treatment programmes and modifications to these if required.
Hardware
The Mora Super is a well built, solid, desk based, self-contained
device. The main box is constructed from durable plastic and has an appropriate
professional look.
All the controls are situated on the front panel and have a good high-quality feel to them. Most operations are controlled by a block of numeric
and function keys on the front panel. A clear LCD
display indicates selected programmes and current status. To the left is a
meter scaled between 0 and 100 and is used to indicate Electrodermal Screening readings.
At the rear of the Mora Super are various connectors for probes, cups and electrodes. All connectors are of BNC shielded type to ensure isolation from stray electromagnetic fields. An internal lead acid battery powers the unit and is automatically charged when the unit is plugged into the mains. The battery should give a good days screening before requiring recharging and its current charge status can be viewed on the front display.
An assortment of good quality electrodes are available including rollers, hand mass, probes, magnetic head, dental probes, comb, feet plate, headband etc. The EDS probe is of traditional construction. As with all EDS probes it will take time and practice to become proficient but this is a skill well worth learning.
The optional computer interface module gives access to the PC based windows application allowing client records to be stored and electronic homeopathy to be used. This module plugs into the space beneath the keypad on the front panel.
Our overall impression is that this device is built to a high standard and should give many years of use. The manufacturer, Mora, offers modular upgrade options as and when they become available so you can always keep your machine up-to-date without buying a whole new device.
Software
The main operating software is built into the machine and allows
comprehensive control of the device. Additional PC-based software is
available giving the ability to view screening information on a computer
display, incorporate electronic homoeopathy and store clients results.
The built in software uses the main display to show menu options, configure settings and display results from a screening. The main menu is well laid out and allows straight forward selection of options including Mora therapy programs, standard EDS organ screening, Dental testing, homeopathic potencies (medication testing), stimulation therapy, sector testing, conductance testing and sensitivity (allergy) testing. All the Mora functions can be controlled from the built-in software, however the results cannot be stored and will be lost at the end of the session.
The
PC based software is used to store client records, comprehensively display
screening information during a session and print reports. It also gives access
to electronic homoeopathy, colour screening and five element analysis.
The screen shown right is displayed when performing Meridian analysis through
EDS. When a
reading is taken the line graph at the bottom left indicates the points response.
This information is summarised in the middle section for each point tested. A useful feature is the
yellow line near the top of the screen which indicates the speed at which the
probe
is applied, aiding the judgement of optimum application of the probe. Various
reports can be generated from the stored results and printed off.
The electronic homoeopathy module allows the selection of substances to be tested from menus and reduces the need for physical test ampoules. Selections can be tested against unbalanced acupuncture meridian points and if the response improves this indicates a causative factors or required remedies depending on what is being tested.
In us
The Mora Super can be used in a number of ways ranging from simple basic
therapy to advanced applications.
Simple bioresonance therapeutic treatment. The client's case history is taken and from a look up book the required preset treatment programmes that matches their complaints can be selected. Appropriate electrodes are placed as indicated in the book and the 'Go' button is pressed. Simple, quick and straightforward.
Intermediate EDS analysis. Here the energetic state of the clients acupuncture meridians are assessed with the EDS (Electro Dermal Screening) probe by applying it to acupuncture points on the ends of the fingers and toes. Nutrition, toxic and food issues can also be assessed in this way. From this energetic information a more precise treatment programme can be determined in conjunction with the look up book.
Advance Modified bioresonance treatments. It is possible to mollify preset treatment programmes in a number of ways or generate completely new treatment programmes. By using EDS feedback a precise, customise treatment programme can be devised for the client and incorporated into 2 above.
In a typical treatment the client will sit in a chair with their bare feet on a foot plate and hold an electrode in each hand. The practitioner selects a basic treatment programme with the option to incorporate biorhythms (in which case the clients date of birth is entered). This initial treatment programme lasts 10 to 15 minutes and they may feel a mild tingling sensation. After this the EDS evaluation and main treatment can be performed.
Depending
on the clients presenting condition the practitioner may select to either
directly work with the symptoms or perform deeper analysis to find the root cause
and specific remedies. At the simplest level when working directly with symptoms
the practitioner looks up in the supplied manual for the required bioresonance program for
example 143 is for eye disorders. Over 100 programs are preset in the device.
The manual indicates which electrodes are to be connected and where they are to be
placed on the client, the program number is typed into the number keypad and sets to run for 10 to 20 minutes. This procedure
may need to be repeated two or three times a week. This may be sufficient
therapy or more detailed analysis may be required. There is
also the option of storing the output frequencies in a carrier fluid or oil which
is placed in the output cup. This oil can then be applied to the skin by the client
as required.
The procedure to perform an EDS evaluation and bio-resonant
treatment programme is as follows. The client sits in a chair and holds a hand mass electrode in one hand and
the EDS probe is applied in turn to acupuncture points near the nails of each
finger and toe by the practitioner. The probe is fairly comfortable to hold and requires reasonable
pressure to get a true readings. As the probe is applied the mechanical meter on
the front of the Mora Super indicates the reading. An audio sound is also generated which increases in pitch
as the reading value increases. As each reading is completed (3 or 4 seconds of
probe application) the small button on the
probe is pressed and the next point can then be probed. If the optional PC
software is being used the readings are displayed on a computer screen. This
process gives the energetic status for each of 20 meridians/ body systems and
allows the practitioner to determined the priority treatment areas.
The treatment programme can then be selected and modified for specific client requirements. To modify the settings the EDS probe is used to give biofeedback information from the client as to their needs. A large number of parameters can be changed including magnitude of harmonious and dis-harmonious frequencies, which frequencies are mirrored, time span for program and ramped levels of amplification. This all sounds a little technical and is covered in the training, however you do not have to get this involved. You can start using these options as your confidence and experience grows with using the device. Once the treatment program has been set it can be run individually or in combination with other programs. After the treatment has finished the Meridian point readings can be retaken and compared with the original to show the energetic change in the client.
Inverse testing on the Mora Super is used to determine client sensitivities to substances such as foods and environmental factors. First an acupuncture point is found that is unbalanced such as the allergy Meridian. An item to be tested such as a food or animal hair is placed in the input honeycomb and the inverse test is selected from the menu. The point reading is then retaken and if the balance improves this indicates the client has a sensitivity to the item.
Results
Without the computer software limited reports can only be produced and you will
need to check printer compatibility. The PC software
allows printing of comprehensive reports as shown right.
Effectiveness
The Mora Super appears to offer an effective treatment process and can accelerates
healing times noticeably. There is a strong following in Germany and many papers have been
produced outlining its effectiveness with a wide range of health conditions.
Some conditions can be treated with the Mora alone others may
require additional use of nutritionals, herbs etc.
How differs from other products
This product stands out from the rest in its construction quality and
the ability to make comprehensive modifications to the standard treatment
protocols if required. It also has a good range of electrodes
available which should cover all eventualities.
Training
Stage one training in the UK is for four days. Stage two training is in Germany
and is for three days. Various master-classes are also held in Germany.
Would suit
This device is suited to both novice and advanced energy medicine
practitioner. It can be used with basic anatomy and physiology however a
background in nutrition, homoeopathy, herbs etc would allow you to take
full advantage of its potential.
How many in the UK
Approximately 13.
History
In the 1970s Dr Franz Morell and the engineer Eric Rasche
developed the first Mora bioresonance instrument which has been continuously
refined to form the current Mora Super.
Cost - These are guideline costs only, please check with supplier for
full details.
| Mora Super + unit | £9259.00 + vat | Base unit including and electrodes, EDS stylus, dental electrodes, foot console, input cup, magnetic output cup. |
| Special accessories | £1312.00 + vat | Honeycomb, roller electrodes, point stylus, comb electrode, magnetic probe, spin tester. |
| PC interface | £733.50 + vat | Required to connect to computer and run software. |
| Software - Winbase | £1037.00 +vat | View results on screen + store client records |
| Software - electronic homeopathy | £1659 to £3669 + vat | Depending on modules selected |
Copyright
emreview.org.uk 2004. All rights reserved. Disclaimer
Home > Treatment
> BioResonance >
Mora Super Print
Page